|
The Signal Generator works in conjunction with the TOMKAT 2 locator.
There are two ways in which the Signal Generator operates the first is by applying a signal by induction, the second is by direct connection.
To operate the Signal Generator in Induction, simply stand the Signal Generator on the ground and turn the orange mode selector to the induction position.
To operate the Signal Generator in Direct Connection, connect the Signal Generator to the service you wish to trace using the appropriate connection leads, select the connection mode on the Signal Generator select the generator mode on the TOMKAT 2 and trace the service.
It is advisable to always use "Connection Mode" whenever possible as this is by far the best way to trace and identify buried conductors.
Features Include:
3 Position mode selector switch.
Compact robust reliable construction.
Operates on 8 x AA alkaline batteries.
Supplied as standard complete with 3-pin plug connector, direct connection leads and earth stake.
| Description |
Signal Generator used in conjunction with the TOMKAT 2 |
| Technical Specification |
Technical & all other specification subject to change without notice. |
| On/Off Switch |
Transmitter is turned off in this position |
| Induction Mode |
33 khz |
| Connection Mode |
33 khz |
| Protection |
Isolation transformer allows direct connection via a 3 pin plug connector to mains supply |
| Power Output |
120mw |
| Audio induction mode |
Audible pulsed tone |
| Audio connection mode |
Audible pulsed tone with distinct tone change confirms good connection is made |
| Audio on/off |
No tone indictaes battery replacement required |
| Batteries |
8 x AA alkaline supplied fitted typical battery life 50 hours intermittent use |
| Operating Temperature |
-20C to + 50C |
| Compatibility |
Will work with all locators receiving a 33khz signal |
| Accessories |
Supplied with Earth stake, Connection leads and 3 pin plug connector |
| Mains Connection |
3 pin plug connector allows direct connection to live mains via a 3 pin socket |
| Construction |
Moulded from high impact ABS weatherproof to IP54 CE tested |
| Dimensions |
285mm x 185mm x 195mm |
| Shipping Box |
305mm x 205mm x 215mm |
| E M C Testing |
EN55014 |
| Weight |
2.5kg |
|